Molecular Orbital Energy Research Articles

Thiadiazole/Thiadiazine Derivatives as Insecticidal Agent: Design, Synthesis, and Biological Assessment of 1,3,4-(Thiadiazine/Thiadiazole)-Benzenesulfonamide Derivatives as IGRs Analogues against Spodoptera littoralis.

In keeping with our investigation, a simple and practical synthesis of novel heterocyclic compounds with a sulfamoyl moiety that can be employed as insecticidal agents was reported. The compound 2-hydrazinyl-N-(4-sulfamoylphenyl)-2-thioxoacetamide 1 was coupled smoothly with triethylorthoformate or a variety of halo compounds, namely phenacyl chloride, chloroacetyl chloride, chloroacetaldehyde, chloroacetone, 1,3-dichloropropane, 1,2-dichloroethane, ethyl chloroformate, 2,3-dichloro-1,4-naphthoquinone, and chloroanil respectively, which afforded the 1,3,4-thiadiazole and 1,3,4-thiadiazine derivatives. The new products structure was determined using elemental and spectral analysis. Under laboratory conditions, the biological and toxicological effects of the synthetic compounds were also evaluated as insecticides against Spodoptera littoralis (Boisd.). Compounds 3 and 5 had LC50 values of 6.42 and 6.90 mg/L, respectively. The investigated compounds (from 2 to 11) had been undergoing molecular docking investigation for prediction of the optimal arrangement and strength of binding between the ligand (herein, the investigated compounds (from 2 to 11)) and a receptor (herein, the 2CH5) molecule. The binding affinity within docking score (S, kcal/mol) ranged between -8.23 (for compound 5), -8.12 (for compound 3) and -8.03 (for compound 9) to -6.01 (for compound 8). These compounds were shown to have a variety of binding interactions within the 2CH5 active site, as evidenced by protein-ligand docking configurations. This study gives evidence that those compounds have 2CH5-inhibitory capabilities and hence may be used for 2CH5-targeting development. Furthermore, the three top-ranked compounds (5, 3, and 9) and the standard buprofezin were subjected to density functional theory (DFT) analysis. The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy difference (ΔE) of compounds 5, 3, and 9 was found to be comparable to that of buprofezin. These findings highlighted the potential and relevance of charge transfer at the molecular level.

Enhancement of thermoelectric performance of thienoisoindigo based D‐A conjugated polymers through the incorporation of 3,4‐ethylenedioxythiophene as donor unit

AbstractWith the good planarity of conjugated backbone and high charge carrier mobilities, thienoisoindigo (TIIG)‐based polymers show great potential in organic electronic devices. In this work, two TIIG‐based D‐A conjugated polymers (PTIIG‐3T and PTIIG‐2T‐EDOT) were designed and synthesized, which exhibit high lying highest occupied molecular orbital (HOMO) energy level and can be facilely doped by FeCl3. Compared with PTIIG‐3T, one thiophene unit in the donor building block is replaced by 3,4‐ethylenedioxythiophene (EDOT) in PTIIG‐2T‐EDOT, and PTIIG‐2T‐EDOT shows a higher HOMO level with slightly higher coplanarity than PTIIG‐3T, which induce an enhancement in electrical conductivity after oxidation doping. After proper doping, doped PTIIG‐2T‐EDOT film achieved a higher TE power factor of 17.9 μW m−1 K−2 than that of PTIIG‐3T due to its higher conductivity. The results indicate that TIIG unit is a promising building block for future high‐performance conjugated polymers for thermoelectric applications, and incorporation of the EDOT unit into D‐A conjugated polymers could be an effective way to develop high performance thermoelectric polymers.

Boosting the performance of polymer field-effect transistors through fluorine atom substitutions and comparing the effect of various acceptor units and channel mobilities

Three conjugated copolymers, PDPP-2FTVT, PIID-2FTVT, and PNDI-2FTVT based on the 2,2′-(1E)-1,2-ethenediylbis[3-fluorothiophene] (2FTVT) core with varying acceptor units, diketopyrrolopyrrole (DPP), isoindigo (IID), and naphthalenediimide (NDI) were developed for organic field-effect transistors (OFETs). Combined electron-withdrawing fluorine atoms and vinyl linkage in the 2FTVT unit not only reduce the frontier molecular orbital energies but also extended the absorption profile and planarize the polymer backbone, manifesting synergetic effect on the strengthened molecular interactions and charge-carrier properties. The resulted copolymer, PDPP-2FTVT show highly reliable thin film transistor properties with highest hole mobility of 1.93 cm2 V−1 s−1 compared to PIID-2FTV and PNDI-2FTVT. PIID-2FTV copolymer show ambipolar characteristic with hole and electron mobilities of 0.71 and 0.03 cm2 V−1 s−1 respectively while PNDI-2FTVT exhibited the highest electron mobility of 0.20 cm2 V−1 s−1 among three copolymers. Thin film micro-structure characterization reveal that the three copolymers formed lamellar, edge-on molecular packing (for PDPP-2FTVT and PIID-2FTV), increased crystallinity with smaller π-π stacking distances, and strengthen the planarity after thermal annealing. These results contribute important progresses in solution-processed OFET and could provide a greater possibility of 2FTVT based copolymers for commercial application.

Dipole Moments Regulation of Biphosphonic Acid Molecules for Self-assembled Monolayers Boosts the Efficiency of Organic Solar Cells Exceeding 19.7.

PSS has been widely used as a hole extraction layer (HEL) in organic solar cells (OSCs). However, their acidic nature can potentially corrode the indium tin oxide (ITO) electrode over time, leading to adverse effects on the longevity of the OSCs. Herein, we have developed a class of biphosphonic acid molecules with tunable dipole moments for self-assembled monolayers (SAMs), namely, 3-BPIC(i), 3-BPIC, and 3-BPIC-F, which exhibit an increasing dipole moment in sequence. Compared to centrosymmetric 3-BPIC(i), the axisymmetric 3-BPIC and 3-BPIC-F exhibit higher adsorption energies (Eads) with ITO, shorter interface spacing, more uniform coverage on ITO surface, and better interfacial compatibility with the active layer. Thanks to the incorporation of fluorine atoms, 3-BPIC-F exhibits a deeper highest occupied molecular orbital (HOMO) energy level and a larger dipole moment compared to 3-BPIC, resulting in an enlarged work function (WF) for the ITO/3-BPIC-F substrate. These advantages of 3-BPIC-F could not only improve hole extraction within the device but also lower the interfacial impedance and reduce nonradiative recombination at the interface. As a result, the OSCs using SAM based on 3-BPIC-F obtained a record high efficiency of 19.71%, which is higher than that achieved from the cells based on 3-BPIC(i) (13.54%) and 3-BPIC (19.34%). Importantly, 3-BPIC-F-based OSCs exhibit significantly enhanced stability compared to that utilizing PEDOT:PSS as HEL. Our work offers guidance for the future design of functional molecules for SAMs to realize even higher performance in organic solar cells.

Molecular Hydrogen Acts as a Hydrogen Bond Proton Acceptor: From Protonated Betaine Tagging to the Weakest Hydrogen Bond.

In an attempt to gain further insights into the intermolecular interactions implied by Rizzo's group's cautionary tale related to molecular tagging in infrared multiple photon dissociation (IRMPD) spectroscopy with molecular messengers [Masson, A. . J. Chem. Phys. 2015, 143, 104313], in the present study, we provide an in-depth analysis of the noncovalent interaction between the molecular hydrogen and protonated betaine molecule in the gas phase. We aim to shed some new light on the fundamental issues concerning the wide diapason of hydrogen-bonding-type intermolecular interactions, with a wide variety of proton acceptors. We demonstrate that in the course of tagging the protonated betaine with molecular hydrogen from the OH group side, it is the σ bond of molecular hydrogen that plays the role of hydrogen-bonding proton acceptor. The tagging thus induces a small yet significant red shift of the protonated betaine O-H stretching mode. We investigate the performance of a wide range of density functional theory (DFT) functionals for the calculation of anharmonic vibrational frequency shifts of the studied system, which are essential for the correct interpretation of the experimental IRMPD data. For an accurate prediction of the OH stretching frequency shifts, specifically designed functionals such as Handy's group HCTH/407 should be applied. The empirical dispersion correction enhances the systematic overestimation of the anharmonic frequency shift, characteristic of the most widely used DFT functionals. Combining the full-wave function approach with the charge field perturbation and natural bond orbital (NBO) deletion analyses, we demonstrate that the frequency shift in the OH-tagged structure is governed by the σHH → σ*OH intermolecular charge transfer. This interaction stabilizes the OH-tagged dimer as well, in contrast to the dipole-quadrupole electrostatic interaction energy term. Topological analysis of the electron density reveals the presence of an intermolecular bond critical point with a positive value of the density Laplacian very close to the lower limit for hydrogen bonds. NCI analyses demonstrate that the OH···H2 interaction is weaker than the intramolecular CH···O one within the protonated betaine molecule, with the through of reduced density gradient appearing at less negative sign(λ2)·ρ values. Analyzing the O-H stretching vibrational potential with the second-generation absolutely localized molecular orbitals energy decomposition analysis (ALMO-EDA 2) revealed that in the case of betaineH(+) tagged from the OH group side, the permanent electrostatics (ΔEelec), polarization (ΔEpol), and charge-transfer (ΔEct) contributions to the total intermolecular interaction energy contribute favorably to the weak hydrogen bond formation and to the red shift of the fundamental O-H stretching frequency, the ΔEct contribution being the most significant in the last context. The Pauli repulsion term, on the other hand, favors an O-H stretching frequency blue shift as a consequence of the vibrational confinement effects.

Structural and Functional Characterization of Medicinal Plants as Selective Antibodies towards Therapy of COVID-19 Symptoms

Considering the COVID-19 pandemic, this research aims to investigate some herbs as probable therapies for this disease. Achillea millefolium (Yarrow), Alkanet, Rumex patientia (Patience dock), Dill, Tarragon, and sweet fennel, including some principal chemical compounds of achillin, alkannin, cuminaldehyde, dillapiole, estragole, and fenchone have been selected. The possible roles of these medicinal plants in COVID-19 treatment have been investigated through quantum sensing methods. The formation of hydrogen bonding between the principal substances selected in anti-COVID natural drugs and Tyr-Met-His (the database amino acids fragment), as the active area of the COVID protein, has been evaluated. The physical and chemical attributes of nuclear magnetic resonance, vibrational frequency, the highest occupied molecular orbital energy and the lowest unoccupied molecular orbital energy, partial charges, and spin density have been investigated using the DFT/TD-DFT method and 6-311+G (2d,p) basis set by the Gaussian 16 revision C.01 program toward the industry of drug design. This research has exhibited that there is relative agreement among the results that these medicinal plants could be efficient against COVID-19 symptoms.

Improvement of Perovskite Solar Cells Efficiency by Management of the Electron Withdrawing Groups in Hole Transport Materials: Theoretical Calculation and Experimental Verification.

Management of functional groups in hole transporting materials (HTMs) is a feasible strategy to improve perovskite solar cells (PSCs) efficiency. Therefore, starting from the carbazole-diphenylamine-based JY7 molecule, JY8 and JY9 molecules are incorporated into the different electron-withdrawing groups of fluorine and cyano groups on the side chains. The theoretical results reveal that the introduction of electron-withdrawing groups of JY8 and JY9 can improve these highest occupied molecular orbital(HOMO)energy levels, intermolecular stacking arrangements, and stronger interface adsorption on the perovskite. Especially, the results of molecular dynamics (MD) indicate that the fluorinated JY8 molecule can yield a preferred surface orientation, which exhibits stronger interface adsorption on the perovskite. To validate the computational model, the JY7-JY9 are synthesized and assembled into PSC devices. Experimental results confirm that the HTMs of JY8 exhibit outstanding performance, such as high hole mobility, low defect density, and efficient hole extraction. Consequently, the PSC devices based on JY8 achieve a higher PCE than those of JY7 and JY9. This work highlights the management of the electron-withdrawing groups in HTMs to realize the goal of designing HTMs for the improvement of PSC efficiency.

Dynamically constructing robust cathode-electrolyte-interphase on nickel-rich cathode by organic boron additive for high-performance lithium-ion batteries

Nickel-rich ternary cathode materials LiNi0.8Co0.1Mn0.1O2 (NCM811) have attracted broad attention due to their high voltage and high energy density for lithium-ion batteries. However, rapid capacity decay due to unstable particle surface inhibit the application. Artificial cathode electrolyte interface (CEI) is undoubtedly a more effective and simpler way to solve this issue. Here, stable and highly conductive in situ CEI is designed using a low-cost organic boron additive isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (ITD). Higher occupied molecular orbital energy endows ITD ability to participate in forming CEI. ITD-contained CEI can reduce nickel dissolving, resulting in a lower self-discharge rate, which is benefit from the uniform and stable CEI on the NCM811 surface. As expected, ITD-based CEI can restrain NCM811crystal cracking in Li||NCM811 half batteries, improving capacity retention from 29.4 % to 93.0 % after 200 cycles at 1C (1C = 200 mA g−1). It is worth mentioning that ITD–derived CEI is conducive to ion migration, which improve the rate capacity retention from 91.5 % to 95.5 %.

Crystal structure characterization, Hirshfeld surface analysis, and DFT calculation studies of 1-(6-amino-5-nitronaphthalen-2-yl)ethanone

The title compound, C12H10N2O3, was obtained by the deacetylation reaction of 1-(6-amino-5-nitronaphthalen-2-yl)ethanone in a concentrated sulfuric acid methanol solution. The molecule comprises a naphthalene ring system bearing an acetyl group (C-3), an amino group (C-7), and a nitro group (C-8). In the crystal, the molecules are assembled into a two-dimensional network by N...H/H...N and O...H/H...O hydrogen-bonding interactions. n–π and π–π stacking interactions are the dominant interactions in the three-dimensional crystal packing. Hirshfeld surface analysis indicates that the most important contributions are from O...H/H...O (34.9%), H...H (33.7%), and C...H/H...C (11.0%) contacts. The energies of the frontier molecular orbitals were computed using density functional theory (DFT) calculations at the B3LYP-D3BJ/def2-TZVP level of theory and the LUMO–HOMO energy gap of the molecule is 3.765 eV.

The impact of CBz-PAI interlayer in various HTL-based flexible perovskite solar cells: A drift-diffusion numerical study

In perovskite solar cells (PSCs), the charge carrier recombination obstacles mainly occur at the ETL/perovskite and HTL/perovskite interfaces, which play a decisive role in the solar cell performance. Therefore, this study aims to enhance the flexible PSC (FPSC) efficiency by adding the newly designed CBz-PAI-interlayer (simply CBz-PAI-IL) at the perovskite/HTL interface. In addition, substantial work has been carried out on five different HTLs (Se/Te-Cu2O, CuGaO2, V2O5, and CuSCN, including conventional Spiro-OMeTAD as a reference HTL with and without CBz-PAI-IL), using drift-diffusion simulation to find suitable FPSC design to attain the maximum PCE. Interestingly, PET/ITO/AZO/ZnO NWs/FACsPbBrI3/CBz-PAI/Se/Te-Cu2O/Au device architecture demonstrates the highest achievable power conversion efficiency (PCE) of 27.9%. The findings of this study confirmed that the reference device (without IL) displays a large valence band edge (VBE)/highest occupied molecular orbital (HOMO) energy level misalignment compared to the modified interface device (with CBz-PAI-IL that reduces VBE/HOMO level mismatch) that eases the hole transport, simultaneously, it reduces the charge carrier recombinations at the interface, resulting in diminished Voc losses in the device. Furthermore, the influence of perovskite absorber thickness and defect density, parasitic resistances, and working temperature are systematically examined to govern the superior FPSC efficiency and concurrently understand the device physics.

Design, synthesis and theoretical simulations of novel spiroindane-based enamines as p-type semiconductors.

The search for novel classes of hole-transporting materials (HTMs) is a very important task in advancing the commercialization of various photovoltaic devices. Meeting specific requirements, such as charge-carrier mobility, appropriate energy levels and thermal stability, is essential for determining the suitability of an HTM for a given application. In this work, two spirobisindane-based compounds, bearing terminating hole transporting enamine units, were strategically designed and synthesized using commercially available starting materials. The target compounds exhibit adequate thermal stability; they are amorphous and their glass-transition temperatures (>150°C) are high, which minimizes the probability of direct layer crystallization. V1476 stands out with the highest zero-field hole-drift mobility, approaching 1 × 10-5 cm2 V s-1. To assess the compatibility of the highest occupied molecular orbital energy levels of the spirobisindane-based HTMs in solar cells, the solid-state ionization potential (Ip) was measured by the electron photoemission in air of the thin-film method. The favourable morphological properties, energy levels and hole mobility in combination with a simple synthesis make V1476 and related compounds promising materials for HTM applications in antimony-based solar cells and triple-cation-based perovskite solar cells.

Red Shift in the Absorption Spectrum of Phototropin LOV1 upon the Formation of a Semiquinone Radical: Reconstructing the Orbital Architecture.

Flavin mononucleotide (FMN) is a ubiquitous blue-light pigment due to its ability to drive one- and two-electron transfer reactions. In both light-oxygen-voltage (LOV) domains of phototropin from the green algae Chlamydomonas reinhardtii, FMN is noncovalently bound. In the LOV1 cysteine-to-serine mutant (C57S), light-induced electron transfer from a nearby tryptophan occurs, and a transient spin-correlated radical pair (SCRP) is formed. Within this photocycle, nuclear hyperpolarization is created by the solid-state photochemically induced dynamic nuclear polarization (photo-CIDNP) effect. In a side reaction, a stable protonated semiquinone radical (FMNH·) forms undergoing a significant bathochromic shift of the first electronic transition from 445 to 591 nm. The incorporation of phototropin LOV1-C57S into an amorphous trehalose matrix, stabilizing the radical, allows for application of various magnetic resonance experiments at ambient temperatures, which are combined with quantum-chemical calculations. As a result, the bathochromic shift of the first absorption band is explained by lifting the degeneracy of the molecular orbital energy levels for electrons with alpha and beta spins in FMNH· due to the additional electron.

Machine Learning-Based Prediction of Reduction Potentials for PtIV Complexes.

Some of the well-known drawbacks of clinically approved PtII complexes can be overcome using six-coordinate PtIV complexes as inert prodrugs, which release the corresponding four-coordinate active PtII species upon reduction by cellular reducing agents. Therefore, the key factor of PtIV prodrug mechanism of action is their tendency to be reduced which, when the involved mechanism is of outer-sphere type, is measured by the value of the reduction potential. Machine learning (ML) models can be used to effectively capture intricate relationships within PtIV complex data, leading to highly accurate predictions of reduction potentials and other properties, and offering significant insights into their electrochemical behavior and potential applications. In this study, a machine learning-based approach for predicting the reduction potentials of PtIV complexes based on relevant molecular descriptors is presented. Leveraging a data set of experimentally determined reduction potentials and a diverse range of molecular descriptors, the proposed model demonstrates remarkable predictive accuracy (MSE = 0.016 V2, RMSE = 0.13 V, R2 = 0.92). Ab initio calculations and a set of different machine learning algorithms and feature engineering techniques have been employed to systematically explore the relationship between molecular structure and similarity and reduction potential. Specifically, it has been investigated whether the reduction potential of these compounds can be described by combining ML models across different combinations of constitutional, topological, and electronic molecular descriptors. Our results not only provide insights into the crucial factors influencing reduction potentials but also offer a rapid and effective tool for the rational design of PtIV complexes with tailored electrochemical properties for pharmaceutical applications. This approach has the potential to significantly expedite the development and screening of novel PtIV prodrug candidates. The analysis of principal components and key features extracted from the model highlights the significance of structural descriptors of the 2D Atom Pairs type and the lowest unoccupied molecular orbital energy. Specifically, with just 20 appropriately selected descriptors, a notable separation of complexes based on their reduction potential value is achieved.

Cluster size distributions, electronic characteristics and geometric structures of mixed cationic clusters of cesium and sulfur hexafluoride doped in helium

Mass Spectrometry has emerged as a valuable technique for investigating molecular cluster characteristics, including size distributions, compositions, stabilities and reactivity. In this study, we present a mass spectrometric analysis of cesium Cs mixed with sulfur hexafluoride S F 6 clusters, denoted as [ Cs ] n [ S F 6 ] m + , encapsulated within helium nanodroplets HNDs. Our analysis involved precise evaluation of mass spectra and calculating ion abundances taking into account the isotope patterns of ions. Additionally, we examined geometrical structures and stabilities of these molecules along with their corresponding highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gaps. This finding sheds light on the fundamental properties and behaviour of mixed molecular clusters, offering insights into their potential applications and interactions.

N-Type semiconducting polymers based on an bithiophene imide-bridged isoindigo for organic field-effect transistors

n-Type polymer semiconductors are essential for enabling high-performance organic electronic devices; however, their development still remains a challenge. Herein, we reported a new electron-deficient building block, i.e. bithiophene imide (BTI)-bridged isoindigo (IID), BTIID, through a Knoevenagel condensation reaction between the bisaldehyde BTI and the alkylated indolinones. Three donor-acceptor (D-A) copolymers were then successfully synthesized via standard Stille coupling reaction based on this novel building block, which exhibit highly planar backbones and low-lying lowest unoccupied molecular orbitals (LUMO) energy levels. When integrated into organic field-effect transistors (OFETs), these polymers demonstrated unipolar n-type transport characteristics with a highest electron mobility of 5.79 × 10−4 cm2 V−1 s−1. Our research results indicate that the design of strong electron-withdrawing units via integrating two different electron-acceptor units into one single structure represents a promising strategy for developing n-type polymer semiconductors with low-lying LUMO energy levels.

Synthesis of Nano-Structured Conjugated Polymers with Multiple Micro-/Meso-Pores by the Post-Crosslinking of End-Functionalized Hyperbranched Conjugated Polymers.

A nano-structured conjugated polymer with multiple micro-/meso-pores was synthesized by post-crosslinking of an end-functionalized hyperbranched conjugated prepolymer. Firstly, an AB2 monomer 3-((3,5-dibromo-4-(octyloxy)phenyl)ethynyl)-6-ethynyl-9-octyl-9H-carbazole (PECz) was synthesized and polymerized by Sonogashira reaction to give the -Br end-functionalized hyperbranched conjugated prepolymer hb-PPECz. The photophysical and electrochemical properties of hb-PPECz were investigated. The λmax of absorption and emission of hb-PPECz in tetrahydrofuran (THF) solution was 313 and 483 nm, respectively. The optical energy bandgap, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) energy levels of hb-PPECz were 2.98, -5.81, and -2.83 eV, respectively. Then, the prepolymer hb-PPECz was post-crosslinked by Heck reaction with divinylbenzene to give the porous conjugated polymer c-PPECz. The effects of hb-PPECz concentration and added dispersant polyvinylpyrrolidone (PVP K-30) on the morphology and porosity of c-PPECz were investigated. The resulting c-PPECzs showed multiple porous structures mainly constructed by micropores and mesopores. Under a higher hb-PPECz concentration (4 wt/v%), a bulky gel product was obtained. Under lower hb-PPECz concentrations (0.6 wt/v%~2 wt/v%), the resulting c-PPECzs were mainly composed of nano-sized particles. Nearly spheric nanoparticles (200~300 nm) (c-PPECz-5) were obtained under the concentration of 1 wt/v% in the presence of PVP (10 wt% of hb-PPECz). The Brunauer-Emmett-Teller (BET) surface area, pore volume, average pore size, and percentage of pore size below 10 nm of c-PPECz-5 were 10.7781 m2·g-1, 0.0108 cm3·g-1, 4.0081 nm, and 94.47%, respectively.

Substituent effect on the electronic and optical properties of newly designed pyrrole derivatives using density functional theory

Abstract This work explores six newly designed compounds obtained by several substitutions in 2,5-di(2-thienyl) pyrrole molecule. For this series of compounds, the electronic and optical properties were investigated using density functional theory and time-dependent density functional theory (TD-DFT). The new compounds were characterized by calculating the chemical parameters that correlated with their optical and electrical properties. The lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO) energies are calculated using the B3LYP functional with the 6-311G (d, p) basis set. The most low-lying energy level of the LUMO was found for Perr-NO2, indicating its effective electron injection capabilities and oxidation resistance. The HOMO and LUMO distributions of Perr-Cl and Perr-NO2 displayed a remarkable complementarity throughout each component of the two compounds, indicating an effective intermolecular charge transfer. The molecular electrostatic potential analysis demonstrated that the proposed compounds have a broad distribution of electrophilic and nucleophilic sites, which predict a high degree of chemical reactivity. The electron density analysis at the bonding and anti-bonding sites of the title compounds was performed using the electron localization function and local orbital locator techniques. Non-covalent interaction analysis using the reduced density gradient approach classified all types of interaction: repulsive, weak, and attractive interactions within compound fragments. All compounds exhibited a robust repulsive interaction, as proved by the red spikes at 0.038 a.u. The ultraviolet/visible (UV/vis) spectrum was obtained by TD-DFT using CAM-B3LYP models in conjunction with 6-311G (d, p) basis set and methanol as a solvent, the absorption bands were found within the UV range, and the maximum wavelength showed red-shifted increases. These compounds could serve as a base material for developing selective gas sensors with considerable UV/vis absorption (180–400 nm). According to the research results, the designed compounds are good candidates for use as precursors in polymer designs for optoelectronic and sensor applications due to their high electrical conductivity and photochemical properties.

Charge-transfer complexes: halogen-doped anthracene as a case of study.

Charge transfer (CT) crystals exhibit unique electronic and magnetic properties with interesting applications. We present a rational and easy guide which allows to foresee the effective charge transfer co-crystal production and that is based on the comparison of the frontier molecular orbital (MO) energies of a donor and acceptor couple. For the sake of comparison, theoretical calculations have been carried out by using the cheap and fast PM6 semiempirical Hamiltonian and pure HF/cc-pVTZ level of the theory. The results are then compared with experimental results obtained both by chemical (bromine and iodine were used as the acceptor) and electrochemical doping (exploiting an original experimental set-up by this laboratory: the electrochemical transistor). Infra-red vibrational experimental results and theoretically calculated spectra are compared to assess both the effective donor-acceptor (D/A) charge-transfer and transport mechanism (giant IRAV polaron signature). XPS spectra have been collected (carbon (1s) and iodine (3d5/2)) signals, yielding further evidence of the effective formation of the CT anthracene:iodine complex.

Slow sustained releasing LiNO3 from graphite electrode reservoir to regulate solvation structure and stabilize interface

The high de-solvation energy derived from the solvent-rich Li+ solvation sheath and the resultant porous organic-rich electrode/electrolyte interface has hindered the commercialization of low-concentration electrolytes (LCEs). Here, unlike the common method so far reported, we invent an approach of sustained releasing LiNO3 from the graphite (Gr) anode reservoir to optimize the solvation structure and form a stable interface in LCEs. The solubility limit can be overcome by introducing LiNO3 directly in the Gr slurry. Moreover, the stronger binding energy between NO3– and Li+ drives NO3– enter the Li+ solvation sheath, weakening the shielding effect of solvent on Li+, and surprisingly increasing the coordination of PF6- to Li+. Thermodynamically, the corresponding lowest unoccupied molecular orbital energy levels of anions decrease, reducing the de-solvation energy of Li+ and forming a Li3N&LiF-rich solid electrolyte interface (SEI). This inorganic-rich SEI demonstrates advantages of inhibiting the decomposition of solvent and facilitating the transmission of Li+. As a result, the cell with Gr anode containing 1 wt% LiNO3 exhibits superior cycle performance in LCE, almost no degradation within 200 cycles, even higher than that in conventional concentration electrolyte. More importantly, the continuous consumption of NO3– in turn promotes its sustained redissolution from the anode, constituting a virtuous circle of regulating solvation structure, stabilizing interface and improving battery performance. This work blazes a new trail to revive lithium salt additives with low solubility, and expands the design strategy and application prospect of LCEs by building the bridges between regulating the solvation structure and constructing favorable electrode/electrolyte interface.

Synthesis of biomass‐derived ethyl levulinate from steam‐exploded corn straw

AbstractEthyl levulinate (EL) production from steam‐exploded corn straw (SCS) in a cascade of reaction using a Brønsted (B) acid and a Lewis (L) acid in ethanol was studied. The entangled structure of corn straw could be obviously damaged through steam explosion when the pressure was 1.5 MPa holding 10 min. The content of cellulose can be increased from 35.9% to 46.8%, and the contents of hemicellulose and lignin were changed from 16.7% to 8.8% and 22.6% to 27.5%, respectively. EL yield was significantly increased from 10.7 to 24.6 wt% under optimal reaction conditions (L/B = 1/20 [mol/mol], 205°C, 90 min, 1.8 g of SCS, 60 mL of ethanol). According to kinetic models, the activation energies for the main and side reactions were 56.8 and 110.5 kJ mol−1, respectively. It suggested that SCS was more easily to be converted to EL rather than other by‐products. The highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) energy gaps (HOMO‐LUMO gaps) of cellobiose over the mixed acids in ethanol were significantly reduced with frontier molecular orbital (FMO) theory. This work provides an effective strategy for EL production from agricultural waste straws.